Grinding table 1000 mm, with fixed set height
The grinding table with electric height adjustment of the worktop is a complete novelty on the local market. It is designed for grinding and cutting metal elements, and after adding an additional top made of perforated plywood, for grinding wooden elements. The height adjustment of these grinding tables is done by means of two electric columns. The electric columns are protected with special pleated covers that prevent dust from getting inside them. The grinding table has a worktop made of a steel, galvanized lattice and, optionally, for an additional fee, an additional layer of perforated plywood. Dust extraction takes place from the chute of the worktop and (if they are equipped with the grinding table) from the rear extraction walls. The chute is equipped with a drawer for dust and filings. The sanding table needs to be connected via piping to an extraction and filter unit or to a large filter and ventilation unit in multi-station extraction systems. The presented grinding table requires connection in two places (1x lower chute + 1x extraction wall). The load capacity of the table top is 200 kg evenly distributed.
Grinding table specification:
The height of the worktop of this grinding table is 850mm.
Large extraction surface: dust extraction from below and from the rear extraction walls.
For a working table with overall dimensions of 1000x985mm (there are 220mm deep extraction walls on the table top). The top is made of two trusses - the larger truss can be removed without having to remove the top-mounted exhaust walls (or an additional top made of perforated plywood for an extra charge).
1000mm long extraction wall. The dimensions of the wall are 1000x600x220mm (L x H x D).
Possibility to connect the extraction wall from the top or from the side with a fi160mm pipe, then the unused connection is plugged. Bottom chute connected from the back with a fi160mm pipe.
The grinding table has 15W LED lighting with a color of 4000K.
Opening side walls allow for the processing of large workpieces
Removable dust and swarf drawer.
Grinding tables do not have EX certificates. They do not have air filters or a fan in the extraction system, so they must be connected to a suitable extraction and filtering device.